facades

Product Description

A decorative structural and panel system projecting from the face of a wall panel. Gauges vary and are dependent on design loads. Used for aesthetic application.
 

Options:

Length varies and is dependent on building design and appearance requirements.

Dimensions on façades are 3:12 slope typical.

Soffit elevation must be at least 2′-0″ below eave, minimum projection is 1′-6″, maximum projection is 6′-0″, and maximum height is 9′-0″. Mansard/fascia must be 6″ higher than the peak on the endwall and 6″ higher than the eave on the sidewall.