1. Common Types and Usages
of Self-Drilling Fasteners
Used by Garco Buildings Systems

A. #12-14 x 1-1/4 S.D. #2 Panel Fastener with 5/8" Sealing Washer Use: Panel and/or Trim to Framing with a drilling capacity up to 0.187 (3/16") metal thickness 5/16" Hex Head	B. 1/4-14 x 7/8 S.D. #1 Stitch Screw with 5/8" Sealing Washer Use: Panel-to-panel or Trim-to-Panel with a drilling capacity up to 0.095 (1/16"+) metal thickness 5/16" Hex Head
C. #12-14 x 2 S.D. #2 or #3 Panel Fastener with 5/8" Sealing Washer Use: Panel-to-Grit thru 5/8" Gypsum Board with a drilling capacity up to 0.220 (3/16"+) metal thickness 5/16" Hex Head	D. #12-14 x 1-1/2 S.D. #2 Panel Fastener with 5/8" Sealing Washer Use: Panel-to-Framing when using 5" or 6" of insulation with a drilling capactiy up to 0.187 (3/16") metal thickness 5/16" Hex Head
E. #12-14 x S.D. #2 Panel Fastener without Sealing Washer Use: Slide Door and Steel Deck Framing with a drilling capacity up to 0l.187 (3/16") metal thickness 5/16" Hex Head	F. 1/4-14 x 3/4 S.D. #3 Framing Fastener without Sealing Washer Use: Attachment of clips, angles and other framing with a drilling capacity up to 0.220 (3/16"+) metal thickness 3/8" Hex Head
G. #14-10 x 1 Type "S" Metal/Wood Fastener with 5/8" Sealing Washer Use: Panl-to-Wood Framing with a drilling capacity up to length of screw. 5/16" Hex Head	H. #12-14 x 1-7/8 or 2-3/8 S.D. #2 Insulation Panel Fastener with 5/8" Sealing Washer Use: Panel-to-Framing when using a 1" spacer block with blanket insulation with a drilling capacity up to 0.200 (3/16") metal thickness 5/16" Hex Head

J. 1/4-14 x 1-1/4 S.D. #3 Framing Fastener without Sealing Washer Use: Standing Seam Clips to Framing with a drilling capacity up to 0.200 (3/16"+) metal thickness 3/8" Hex Head	K. 1/4-14 x 1-1/4 S.D. #3 Panel Fastener with 5/8" Sealing Washer Use: Garco Standing Seam Panel-to-Framing at eave, endlaps & end dams with a drilling capacity up to 0.220 (3/16"+) metal thickness 3/8" Hex Head
L. #17-14 x 1-1/2 "AB" Panel Fastener with 5/8" Sealing Washer Use: GWS Standing Seam Roof Panel at end dam and cinch strap attachments into backup place. 1" length may be substituted. 5/16" Hex Head (ZAC)	M. #12-24 x 1-1/2 S.D. #5 Panel Fastener with 5/8" Sealing Washer Use: Panel-to-raming over 3/16" thickness with a drill capacity up to 0.500 (12") metal thickness 5/16" Hex Head

Fastener Usage Menu 1. Common Types and Usages of Self-Drilling Fasteners 2. Screw Gun Information Instructions for Trouble-Free Drilling Note Figure #1 Whip   CAD