Ultra-Dek® Panel
| The Ultra-Dek® roof panel is a snap-together, trapezoidal leg SSR system. It requires a minimum slope of 1/4:12 and is ideal for industrial applications. Ultra-Dek® can be used on both commercial and architectural applications. |
| |
Select a Panel
|
| Ultra-Dek® 12" Panel |
| Ultra-Dek® 18" Panel |
| Ultra-Dek® 24" Panel |
| |
NOTE:
As with all standing seam roof systems, sound attenuation (example: blanket insulation) is required between the panel and the substructure to prevent "roof rumble" during windy conditions. Some composite roof systems may require additional acoustical consideration to ensure that thermal vibration noises are isolated from the building interior. Contact your architect and/or engineer for proper acoustical design. |
 |
 |
| The Ultra-Dek® roof panel is a snap-together, trapezoidal leg SSR system. It requires a minimum slope of 1/4:12 and is ideal for industrial applications. Ultra-Dek® can be used on both commercial and architectural applications. |
| |
Product Features
|
| Coverage Width – 12” |
| Minimum Slope – 1/4:12 |
| Panel Attachment – Concealed Fastening System |
| Panel Substrate – Galvalume® |
| Gauge – Standard: 24 Optional: 22 and 26 |
| Finishes – Standard: Smooth Optional: Embossed |
| Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic |
|
 |
| The Ultra-Dek® roof panel is a snap-together, trapezoidal leg SSR system. It requires a minimum slope of 1/4:12 and is ideal for industrial applications. Ultra-Dek® can be used on both commercial and architectural applications. |
| |
Product Features
|
| Coverage Width – 18” |
| Minimum Slope – 1/4:12 |
| Panel Attachment – Concealed Fastening System |
| Panel Substrate – Galvalume® |
| Gauge – Standard: 24 Optional: 22 and 26 |
| Finishes – Standard: Smooth Optional: Embossed |
| Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic |
|
 |
| The Ultra-Dek® roof panel is a snap-together, trapezoidal leg SSR system. It requires a minimum slope of 1/4:12 and is ideal for industrial applications. Ultra-Dek® can be used on both commercial and architectural applications. |
| |
Product Features
|
| Coverage Width – 24” |
| Minimum Slope – 1/4:12 |
| Panel Attachment – Concealed Fastening System |
| Panel Substrate – Galvalume® |
| Gauge – Standard: 24 Optional: 22 and 26 |
| Finishes – Standard: Smooth Optional: Embossed |
| Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic |
|
|
|
