Craftsman™ Series Panel
| This profile panel is a water-shedding system and can be used for roofs and mansards only when installed over a water-proofed solid substructure with a minimum slope of 3:12 roof slope. The roof panel makes complicated transitions without the necessity of unsightly flashings by using transition filler. Slope changes from roof to fascia to soffit are made with one continuous pan and batten. A concealed clip securely locks the batten to the panel while allowing for expansion and contraction. |
| |
Select a panel from the series
|
| Craftsman™ Series High Batten Panel |
| Craftsman™ Series Large Batten Panel |
| Craftsman™ Series Small Batten Panel |
 |
 |
| |
 |
| This profile panel is a water-shedding system and can be used for roofs and mansards only when installed over a water-proofed solid substructure with a minimum slope of 3:12 roof slope. The roof panel makes complicated transitions without the necessity of unsightly flashings by using transition filler. Slope changes from roof to fascia to soffit are made with one continuous pan and batten. A concealed clip securely locks the batten to the panel while allowing for expansion and contraction. |
| |
Product Features
|
| Coverage Width – 12” and 16 1/2” |
| Minimum Slope – 3:12 |
| Panel Attachment – Concealed Fastening System |
| Panel Substrate – Galvalume® |
| Gauge – Standard: 24 Optional: 22, 26 |
| Finishes – Standard: Smooth Optional: Embossed |
| Coatings – Galvalume Plus®, Signature® 200, Signature® 300,Signature® 300 Metallic |
|
 |
| |
 |
| This profile panel is a water-shedding system and can be used for roofs and mansards only when installed over a water-proofed solid substructure with a minimum slope of 3:12 roof slope. The roof panel makes complicated transitions without the necessity of unsightly flashings by using transition filler. Slope changes from roof to fascia to soffit are made with one continuous pan and batten. A concealed clip securely locks the batten to the panel while allowing for expansion and contraction. |
| |
Product Features
|
| Coverage Width – 12” and 16 1/2” |
| Minimum Slope – 3:12 |
| Panel Attachment – Concealed Fastening System |
| Panel Substrate – Galvalume® |
| Gauge – Standard: 24 Optional: 22, 26 |
| Finishes – Standard: Smooth Optional: Embossed |
| Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic |
|
 |
| |
 |
| This profile panel is a water-shedding system and can be used for roofs and mansards only when installed over a water-proofed solid substructure with a minimum slope of 3:12 roof slope. The roof panel makes complicated transitions without the necessity of unsightly flashings by using transition filler. Slope changes from roof to fascia to soffit are made with one continuous pan and batten. A concealed clip securely locks the batten to the panel while allowing for expansion and contraction. |
| |
Product Features
|
| Coverage Width – 12” and 16 1/2” |
| Minimum Slope – 3:12 |
| Panel Attachment – Concealed Fastening System |
| Panel Substrate – Galvalume® |
| Gauge – Standard: 24 Optional: 22, 26 |
| Finishes – Standard: Smooth Optional: Embossed |
|
Signature® 300 Metallic |
|
|
|
